Tool changers and cleaning stations
Laempe Mössner Sinto's automatic tool changers significantly reduce setup times, especially when used in conjunction with our automatic tool cleaning stations. The automatic tool changer provides especially a higher level of efficiency for high production applications.Laempe Mössner Sinto's automatic tool changers significantly reduce setup times, especially when used in conjunction with our automatic tool cleaning stations. The automatic tool changer provides especially a higher level of efficiency for high production applications.
Tool changer - Front or Rear
Tool changing - including the clamping and unclamping of the tool in the core shooter - is fully automatic. The complete cycle runs in accordance with the parameters defined in the control system. A manual mode can also be used. The automatic tool changer significantly reduces tooling change over time.
Cleaning station
Regular cleaning significantly lengthens tool life and greatly improves core quality. The semi-automatic or fully automatic cleaning station is integrated into the tool change system. The tool cleaning station features low operating and consequential costs. When cleaning takes place, the blow plate is raised, cleaned, and placed in an intermediate position. The same then happens with the cope eject plate. The top part of the core box is raised and cleaned along with the bottom part. The cleaning station is housed in a noise protection cabin.
Inquiry
Tool changer and cleaning station are available for the LHL30 / 50 and LFB machines.
Please contact us.
Laempe Mössner Sinto GmbH
Hintern Hecken 3
D-39179 Barleben
Telefon +49 (0) 39202 / 692-0
Fax +49 (0) 39202 / 692-170
info(at)laempe(dot)com